Teral-Aerotech Fans Pvt. Ltd.
Kasna Road, Greater Noida, Gautam Budh Nagar, Uttar Pradesh
GST No. 09AAECA4345D1ZY
Send E-mail
Call 0804876317180% Response Rate
Home»Products»

Industrial Scrubbers

We are a leading Manufacturer of air ventilation system, industrial scrubber, gas scrubbers, acid fume scrubber, bag filters and smoke spill unit from Greater Noida, India.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 64,500  / Piece Get Latest Price

Product Details:
TypeHeat-Recovery
ConfigurationHorizontal, Vertical
ApplicationsFor Large Air Volumes
Min Air Flow2000 m3/h (70629.33 ft3/h)
Max Air Flow50000 m3/h (1765733.31 ft3/h)
Low energy and low carbon is a urgent and very important topic in science and technology filed in the world. On one hand, many buildings already begin to develop to high tight and high heat insulation direction, also people are increasingly demanding Air Ventilation System quality in the building where they live and study in. So we need to dilution the air in the building . The most direct and effective way is to add fresh air to dilution the air in the building,as that can reduce the concentration of harmful gas and reduce sick building syndrome.On the other hand ,in the building there are large used and contaminated air with a lot of heat, which need to go through proper channels to treatment and energy recovery before emissions. This is the HVAC industry development trends,also accord with the requirement of energy saving and environmental protection.

Features:
  • Standard module combination.
  • Frame configuration.
  • Housing main mechanical performance.
  • Housing sealing performance.
  • Muffler performance(Impedance complex muffler).
  • Various function.
  • High quality filter.
Yes! I am Interested
REQUEST CALLBACK
  • Industrial Scrubber
  • Industrial Scrubber
  • Industrial Scrubber
Get Best Quote

Approx. Rs 5.15 Lakh  / Unit Get Latest Price

Product Details:
UsageChemical Industry
We ProvideInstallation & Servicing, Consultation
Efficiency (%)98%
MaterialMS
Country of OriginMade in India
Industrial Scrubber are a diverse group of air pollution control devices that can be used to remove some particulates and/or gases from industrial exhaust streams


Features:

  • Convenient to use

  • Unmatched quality

  • Easy to fix

Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 3.11 Lakh  / Piece Get Latest Price

Product Details:
Body MaterialMS
Surface FinishingPolished
UsageIndustrial
Handling MediaFlue gas / Contaminated Air
Scrubbing MediaWater, Magnesium Oxide, Dual Alkali
Gas scrubbers play vital role in gas cleaning as they not only separate out the dust but poisonous gases also. Classically scrubbers are classified according to application and structural design namely Spray Tower, Tray tower, Packed Bed Scrubber.
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
  • Acid Fume Scrubber
  • Acid Fume Scrubber
Get Best Quote

Approx. Rs 2 Lakh  / Unit Get Latest Price

Product Details:
Airflow (m3/h or CFM)3000- 60,000 m3/h
BrandTeral-Aerotech
We ProvideInstallation & Servicing
MaterialStainless Steel
Sizes600 mm- 3000 mm Dia
Owing to our vast manufacturing facilities, we are able to offer high quality Acid Fume Scrubber. These products are manufactured under the close supervision of our experienced professionals using high quality material and components. Our logistics personnel make sure that the consignments are timely delivered at clients’ destinations.

Features:
  • Low maintenance
  • Sturdy
  • Rust-proof

Other Details:
  • Pickling
  • Chrome Plating
  • Zinc Plating
  • Moulding
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 2.5 Lakh  / Unit(s) Get Latest Price

Product Details:
Body MaterialStainless Steel
Product TypeBag Filter
UsageIndustrial
Power SourceElectric
We are highly appreciated in the international market for our exquisite collection of Bag Filters. The range we offer contains a number of hose made of textile material. The dust laden air/gas is passed through the walls of the hoses from inside to outside or outside to inside. Customers can avail these filters in various specifications at nominal rates.

Features:
  • Low maintenance,
  • High performance,
  • Longer service life.
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 2.15 Lakh  / Piece Get Latest Price

Product Details:
BrandTeral-Aerotech Fans
Surface FinishingPolished
Material of ConstructionStainless Steel
Material GradeSS 304
The Smoke Spill Unit is a necessary requirement of Engine Testing, Welding Shop, Two wheeler and Automotive Plant. In this regard, taking into account that smoke is harmful to human health when planning manufacturing plant / Automotive Test Cell etc.Smoke cannot be release direct in to atmosphere OR at shop floor otherwise smoke can create major health problems at work place which can be avoid by providing Smoke Filtration system. These smoke filtration systems are available for different cfm capacity which will filter smoke from air and release fresh air which can be release at work place.
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 65,500  / Unit Get Latest Price

Product Details:
Automatic GradeAutomatic
Material of ConstructionStainless Steel
TypeCyclone Scrubber
Power SourceElectrical

A Cyclone Scrubber is a method of removing particulates from an air, gas or liquid stream, without the use of filter through vortex separation. When removing particulate matter from liquid, a hydro cyclone is used; while from gas, a gas cyclone is used. Rotational effects and gravity are used to separate mixtures of solids and fluids. The method can also be used to separate fine droplets of liquid from a gaseous stream.

A high speed rotating air flow is established within a cylindrical or conical container called a cyclone. Air flows in a helically pattern, beginning at the top (wide end) of the cyclone and ending at the bottom (narrow) end before exiting the cyclone in a straight stream through the center of the cyclone and out the top. Larger (denser) particles in the rotating stream have too much inertia to follow the tight curve of the stream, and thus strike the outside wall, then fall to the bottom of the cyclone where they can be removed. In a conical system, as the rotating flow moves towards the narrow end of the cyclone, the rotational radius of the stream is reduced, thus separating smaller and smaller particles. The cyclone geometry, together with volumetric flow rate, defines the cut point of the cyclone. This is the size of particle that will be removed from the stream with 60% efficiency. Particles larger than the cut point will be removed with a greater efficiency, and smaller particles with a lower efficiency as they separate with more difficulty or can be subject to re-entrainment .

Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 2.15 Lakh  / Piece Get Latest Price

Product Details:
Voltage240 V
Power80 W
Air Displacement350,700 m3 / hr
Motor0.5 H.P
We offer wide range of Fume Extractors.


Yes! I am Interested
REQUEST CALLBACK
  • Venturi Scrubbers
  • Venturi Scrubbers
  • Venturi Scrubbers
Get Best Quote

Approx. Rs 65,500  / Unit Get Latest Price

Product Details:
Airflow (m3/h or CFM)1300 CFM
UsageSteel Industry
Efficiency (%)99%
Voltage320 V
MaterialStainless Steel
OrientationVertical
Frequency50 Hz
Country of OriginMade in India

A Venturi Scrubbers consists of a converging section, a throat (the narrowest part of the venture tube) and a diffuser. The dust/gas mix flows through the venturi tube and reaches top speed in the throat section. Thereafter, the mixture passes into the diffuser where the speed drops again. Liquid is added to the gas flow either in the throat section or prior to it. Intensive mixing takes place between the gas and the liquid in the throat section of the venture tube. Due to the high speed realized by the gas and liquid, water is released in fine water droplets.

The venturi scrubber itself has a low volume. The dimensions of the installation are primarily determined by the droplet separator, which can be a few times larger than the scrubber. Venturi scrubbers can be used to remove small particles from a gas stream. However, they can also be used for larger particles, though energy use is relatively high in such cases. Teral-aerotech at very high pressure drops, some types of dust cannot be separated. In some venturi it is possible to vary the width of the throat section, thus allowing the separator to be adjusted for varying flow volumes thus retaining a high yield.

Teral-aerotech Venturi Scrubbers, are effective at removing particulate from exhaust with high efficiency. Venturi scrubbers have several advantages compared to other dust collection equipment. Venturi scrubber are able to handle gas streams that contain moisture are high temperature, the overall size of the equipment is typically smaller, and they have the potential to remove pollutant gas at the same time as the particulate.

Application :

  • Venturi scrubber high quality design and construction also incorporate self cleaning features to maintain high on-stream performance. Some of the more common industrial applications of venturi scrubbers include Corn Processing Facilities, Food Manufacturing, Machining and Grinding exhaust, Fiberglass and Composite Industries, Utility Boilers, Foundries and Metal Finishing Operations.
  • A venturi scrubber is designed to effectively use the energy from the inlet gas stream to atomize the liquid being used to scrub the gas stream. This type of technology is a part of the group of air pollution controls collectively referred to as wet scrubbers.
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
  • Venturi Scrubber
  • Venturi Scrubber
Get Best Quote

Approx. Rs 82,650  / Unit Get Latest Price

Product Details:
Airflow (m3/h or CFM)2000 - 100000 CFM
UsageChemical Industry
Efficiency (%)99%
MaterialStainless Steel
OrientationHorizontal
Country of OriginMade in India
With sincere intentions to preserve and uplift our reputation in the market, we bring forth a distinguished assortment of Scrub Venturi Scrubber. The provided scrubber is wet scrubbers that use a change in gas velocity to shear liquid streams into tiny target droplets into which particulate and soluble gases are transferred. This scrubber is commonly used on product dryers and calciners where there is a wet stage. The scrubber offered by us is best in working and can be availed from us in many specifications.


Features:

  • Easy to use due to light weight
  • Maximum strength
  • Commonly used on product dryers and calciners where there is a wet stage

Uses:

  • Commonly used on product dryers and calciners where there is a wet stage
  • Agricultural product rotary dryers are often equipped with primary product collecting cyclones, which are followed by Venturi scrubbers
  • Grinding. milling (wet), mulling, and other operations that generate dust often use Venturi scrubbers for particulate control
  • Boilers such as those firing bagasse or bark are often equipped with Venturi scrubbers
  • Some metallurgic furnaces are equipped with higher energy Venturi scrubbers because the particles generated are smaller
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 4.5 Lakh  / Piece Get Latest Price

Product Details:
Automation GradeAutomatic
TypeDust Scrubber
Material of ConstructionStainless Steel
ApplicationIndustrial

In order to acquire supreme level of gratification of our clients, we are into presenting an enormous consignment of Dust Scrubbers to our privileged patrons. Designed by employing top class quality basic material altogether with modern machinery, these presented products are immensely recommended. Apart from this, their reasonable pricing rates have mustered us huge appreciation all over the country.

Yes! I am Interested
X
 

Download Brochure
Explore more products
Centrifugal Blower Fans
Get Best Quote
Forced Draft Fan
Get Best Quote
Duct Fans
Get Best Quote
Fresh Air Unit
Get Best Quote
Fume Extraction System
Get Best Quote
Forward Curved Blower
Get Best Quote
Corporate Information
Share Us
Vikas Saxena (Director)
Teral-Aerotech Fans Pvt. Ltd.
Plot No. 189, Ecotech Extension- 1
Kasna Road, Greater Noida - 201306
Gautam Budh Nagar, Uttar Pradesh, India
Send Email
© Teral-Aerotech Fans Pvt. Ltd.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited